Post by account_disabled on Dec 31, 2023 7:03:40 GMT
Why is my epoxy pulsating Waves can occur on the epoxy due to temperature changes during the curing process. If your epoxy tumbler is exposed to cold or fluctuating temperatures during curing it can cause ripples or wave patterns to appear. To prevent this make sure you dry the tumbler at a controlled temperature. Also do not place hot or cold objects on the glass until the epoxy has fully cured. What causes dimples in epoxy cups Dimpling also known as orange peel texture is another common problem faced by epoxy tumblers.
This can occur due to improper mixing low temperatures during curing Email Marketing List or insufficient surface preparation. To fix pitting you can lightly sand the affected areas and apply a new coat of epoxy. Don't forget to sand between coats for a silky smooth finish Can you use a hair dryer to remove bubbles from the resin? While it may seem tempting to use a hair dryer to blow bubbles out of the resin this is not the best approach. additional dust and create more bubbles. It's best to use a heat gun or hand torch specifically designed for epoxy projects.
These tools provide targeted heating without the risk of blowing dust onto the glass. Why does the epoxy not stick to the cup If the epoxy does not stick to the glass there can be several reasons. First make sure the surface of the beaker is clean and free of residue or contamination that could interfere with adhesion. Also check that you have lightly sanded the surface as this creates some texture that helps the epoxy adhere better. Finally confirm that you're using a high-quality epoxy that's specially formulated to bond multiple surfaces. What causes fisheye in epoxy Fisheye is a problem that many epoxy enthusiasts face. Fisheye occurs when the epoxy peels away from certain areas creating small craters or pits.
This can occur due to improper mixing low temperatures during curing Email Marketing List or insufficient surface preparation. To fix pitting you can lightly sand the affected areas and apply a new coat of epoxy. Don't forget to sand between coats for a silky smooth finish Can you use a hair dryer to remove bubbles from the resin? While it may seem tempting to use a hair dryer to blow bubbles out of the resin this is not the best approach. additional dust and create more bubbles. It's best to use a heat gun or hand torch specifically designed for epoxy projects.
These tools provide targeted heating without the risk of blowing dust onto the glass. Why does the epoxy not stick to the cup If the epoxy does not stick to the glass there can be several reasons. First make sure the surface of the beaker is clean and free of residue or contamination that could interfere with adhesion. Also check that you have lightly sanded the surface as this creates some texture that helps the epoxy adhere better. Finally confirm that you're using a high-quality epoxy that's specially formulated to bond multiple surfaces. What causes fisheye in epoxy Fisheye is a problem that many epoxy enthusiasts face. Fisheye occurs when the epoxy peels away from certain areas creating small craters or pits.